The Micro/Nano Fabrication Center at the University of Arizona
 

 

Chemical Disclosure

 

When bringing in a chemical into the Micro/Nano Fabrication Center, you must provide Omid Mahdavi with the following information:

  • Quantity needed for project
  • MSDS of the chemical as labeled
  • Method of Disposal
  • Point of Contact
  • Faculty Advisor
  • Date it will be removed from the facility

You must review Chemical Use and Disposal with the Omid Mahdavi prior to bringing chemicals into the lab. All chemicals NOT listed on our MSDS link MUST BE APPROVED PRIOR TO FACILITY ENTRY!

If a chemical is brought into the lab without proper notification, the individual(s) involved will have their laboratory privileges revoked and their Faculty Advisor notified. Safety must come first!

"Safety First!"

 

     
University of Arizona | College of Engineering | 1230 E. Speedway Blvd. | Tucson, AZ 85721-0104
Phone: 520-626-1223 | Fax: 520-626-7877 | contact us
 
Contact The University of Arizona The College of Engineering Map The Micro / Nano Fabrication Center Logo